No chlorinated hydrocarbons
Moderate/low odour washout solution.
SOLFLEXO 60
Clean plates for your flexographic production.
Washout solvent blend for solvent-process photopolymer plates. We help you evaluate the plate, processor and operating conditions.
Product properties
Effective plate washout
Helps remove stains and impurities. For closed and recirculating processing units.
Vacuum distillation
Used product can be recovered using conventional vacuum distillation equipment.
PROCESS EVALUATION
Prepare, test and validate.
Plate and processor
Check the photopolymer type and the processing equipment before selecting operating conditions.
Initial trial
Assess washout temperature, processing time and brush pressure with a representative plate.
Recovery circuit
Review the compatible vacuum distillation system and replenish recovered solvent as specified in the technical data sheet.
Technical reference
Run preliminary trials for the plate type, equipment, process time and brush pressure.
| Washout temperature | 30 °C ± 2 °C |
|---|---|
| Flash point | Above 62 °C |
| Recommended drying | 1–3 hours at 60 °C, depending on thickness. Do not exceed 65 °C. |
| After distillation | Blend with at least 20% fresh product. |
